Webinar via Zoom

Instructor - Joe Sutterfield This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This 4 hour course is for those who design, sell, install and service Carrier and Bryant reverse-cycle air to air heat pump systems.  Content includes: Design criteria, airflow criteria, installation methods and tips, as well as components […]

Instructor - Keith Tanimoto This is a 2 day - 2 hours each day class. (4 HOURS TOTAL)   This 2 Day - 2 Hour per day training is on the Carrier / Bryant Humidi-MiZer system increases the latent capacity of the unit, while still allowing the capability to dehumidify without overcooling the space. When […]

Instructor - Richard Gambaro   This is a 2 Day / 2 Hour per day class.  (4 Hours Total) This 4 hour class will cover zoning application, system design, airflow calculations and formulas . The class emphasis is on proper design, installation, set up, and advanced diagnostics.This course qualifies for 4 hours of continuing education credit […]

Instructor - Jeff Moseley This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This 4 hour training covers the fundamentals of commissioning and servicing commercial rooftop packaged equipment including Staged Air Volume, Static Pressure Measurement, and Basic airflow. This training is essential for any technician starting up or servicing rooftop […]

This is a 2-Day, 3 Hours Per Day (24 HOUR TOTAL) training event. This 6 hour course focuses on the Startup and Service procedures, techniques and tips for the Carrier & Bryant Single and Multi-head indoor mini-split systems. Who should attend: Sales Engineers, Sales Representatives, Contractor Business Owners, Installation and service technicians. This class receives a 4 Hour FAD training […]

This is a 2 day - 2 hour webinar on Infinity / Evolution Controls. (4 HOURS TOTAL) This class receives a 4 Hour FAD training credit and for applicable certifications with NATE. This 4 hour class will cover basic functions and configuration of the actual User Interface. We will go into a more in depth look at […]

This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This 4 hour course is for those who design, sell, install and service Carrier and Bryant reverse-cycle air to air heat pump systems.  Content includes: Design criteria, airflow criteria, installation methods and tips, as well as components and operational differences of […]

This is a 2-Day, 2 Hours Per Day (4 HOUR TOTAL) training event. This 4 hour course focuses on the Application requirements, techniques, and tips as well as installation procedures, techniques and tips for the Carrier & Bryant Single and Multi-head indoor mini-split systems. Who should attend: Sales Engineers, Sales Representatives, Contractor Business Owners, Installation and service technicians. […]

This is a 2-Day / 2-Hour per day course.  (4 HOURS TOTAL) This course focuses on field troubleshooting of Carrier and Bryant Variable Speed ECM,  Multi-tap (X-13) motors, Vane Axial motors and Control Boards. Includes proper diagnostic procedures using sequence of operation, VOM’s, direct testing of motors and modules and the differences of module versions. Webinar […]

This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This is a 4 hour training on the set up, programming , and troubleshooting of Carrier / Bryant commercial VFD systems including the ABB ACS 320 & ACH 550 drive as well as the Danfoss drive used by Carrier & Bryant […]

This is a 2 Day / 2 Hour per day class.  (4 Hours Total) This 4 hour class will cover zoning application, system design, airflow calculations and formulas . The class emphasis is on proper design, installation, set up, and advanced diagnostics.This course qualifies for 4 hours of continuing education credit for NATE certified students, provided their […]