Jason Chapman

This is a 2 day - 2 hour webinar on Infinity / Evolution Controls. (4 HOURS TOTAL) This class receives a 4 Hour FAD training credit and for applicable certifications with NATE. This 4 hour class will cover basic functions and configuration of the actual User Interface. We will go into a more in depth look at […]

This is a 2-Day, 3 Hours Per Day (24 HOUR TOTAL) training event. This 6 hour course focuses on the Startup and Service procedures, techniques and tips for the Carrier & Bryant Single and Multi-head indoor mini-split systems. Who should attend: Sales Engineers, Sales Representatives, Contractor Business Owners, Installation and service technicians. This class receives a 4 Hour FAD training […]

Instructor - Jeff Moseley This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This 4 hour training covers the fundamentals of commissioning and servicing commercial rooftop packaged equipment including Staged Air Volume, Static Pressure Measurement, and Basic airflow. This training is essential for any technician starting up or servicing rooftop […]

Instructor - Richard Gambaro   This is a 2 Day / 2 Hour per day class.  (4 Hours Total) This 4 hour class will cover zoning application, system design, airflow calculations and formulas . The class emphasis is on proper design, installation, set up, and advanced diagnostics.This course qualifies for 4 hours of continuing education credit […]

Instructor - Ron Copeland This is a 2 day - 2 hours each day (4 HOURS TOTAL)   This 4 hour course is for those who design, sell, install and service Carrier and Bryant 80% & 90% gas furnaces. Content includes: Design criteria, ducting criteria, installation methods and tips, gas piping considerations, gas pressure requirements […]

This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This is a 4 hour training on the set up, programming , and troubleshooting of Carrier / Bryant commercial VFD systems including the ABB ACS 320 & ACH 550 drive as well as the Danfoss drive used by Carrier & Bryant […]

This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This 4 hour course is for those who design, sell, install and service Carrier and Bryant reverse-cycle air to air heat pump systems.  Content includes: Design criteria, airflow criteria, installation methods and tips, as well as components and operational differences of […]

4 Hour trainingWe will cover installation of the outdoor unit, indoor unit, and User Interface. We will discuss features and functions of the system and how to ensure proper airflow and understand the critical charging of these systems. We will cover troubleshooting error codes and proper steps in determining the source of the error code.This […]

ALERT!!! - This class requires the use of the ADI Duct Calculator Part # MP-9001. These may be purchased at your local Carrier Enterprise store or through our eCommerce site at https://sc.carrierenterprise.com This is a two day - 2 hour each day webinar. (4 HOURS TOTAL) This course focuses on the design and diagnosis of […]

This is a 2-Day / 2-Hour per day course.  (4 HOURS TOTAL) This course focuses on field troubleshooting of Carrier and Bryant Variable Speed ECM,  Multi-tap (X-13) motors, Vane Axial motors and Control Boards. Includes proper diagnostic procedures using sequence of operation, VOM’s, direct testing of motors and modules and the differences of module versions. Webinar events […]