CE Employee Training Schedule
Calendar of Events
M Mon
T Tue
W Wed
T Thu
F Fri
S Sat
S Sun
1 event,
Heat Pump Systems Training 11/27-11/28 – Zoom
Heat Pump Systems Training 11/27-11/28 – Zoom
This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This 4 hour course is for those who design, sell, install and service Carrier and Bryant reverse-cycle air to air heat pump systems. Content includes: Design criteria, airflow criteria, installation methods and tips, as well as components and operational differences of …
1 event,
Heat Pump Systems Training 11/27-11/28 – Zoom
Heat Pump Systems Training 11/27-11/28 – Zoom
This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This 4 hour course is for those who design, sell, install and service Carrier and Bryant reverse-cycle air to air heat pump systems. Content includes: Design criteria, airflow criteria, installation methods and tips, as well as components and operational differences of …
1 event,
Inverter Driven Unit Training – Live – Carrollton, Texas
Inverter Driven Unit Training – Live – Carrollton, Texas
This is a Live 4 hour training event held in Carrollton Texas. We will cover installation of the outdoor unit, indoor unit, and User Interface. We will discuss features and functions of the system and how to ensure proper airflow and understand the critical charging of these systems. We will cover troubleshooting error codes and …
Inverter Driven Unit Training – Live – Carrollton, Texas Read More »
1 event,
48/50JC Variable Capacity RTU Training – NEW CLASS – LIVE in Carrollton Texas
48/50JC Variable Capacity RTU Training – NEW CLASS – LIVE in Carrollton Texas
The New Carrier WeatherExpert® Ultra High Efficiency rooftop units (RTU) with EcoBlue™ Technology and variable cooling capacity control were designed by customers for customers and integrate new technology to provide value added benefits never seen in this type of equipment before. Exclusive, new EcoBlue™ Technology was designed to improve performance and efficiency while decreasing maintenance …
48/50JC Variable Capacity RTU Training – NEW CLASS – LIVE in Carrollton Texas Read More »
1 event,
R-454B Advanced Puron A2L Introduction Training
R-454B Advanced Puron A2L Introduction Training
The course will be approximately 1.5-2 hours depending on class activity and participation. This course will explore how our equipment is designed to comply with safe operation when R-454B is used. The course will focus on what agencies require for A2L refrigerants and what we are doing to comply, using R-454B specifically. In this course, …
0 events,
0 events,
1 event,
Infinity/Evolution Training in Spanish – LIVE – Carrollton, Texas
Infinity/Evolution Training in Spanish – LIVE – Carrollton, Texas
LIVE training with a Spanish speaking instructor Training Objective: At the completion of this class, the technician will be able to install and troubleshoot Carrier's latest generation Infinity Control and Systems with confidence. Enabling the technician to demonstrate how to use the control for the homeowner including: • Installation of the Infinity™ System • Operational characteristics of …
Infinity/Evolution Training in Spanish – LIVE – Carrollton, Texas Read More »
2 events,
2023 Infinity/Evolution Controls Training – LIVE – Anderson
2023 Infinity/Evolution Controls Training – LIVE – Anderson
Training Objective: At the completion of this class, the technician will be able to install and troubleshoot Carrier's latest generation Infinity Control and Systems with confidence. Enabling the technician to demonstrate how to use the control for the homeowner including: • Installation of the Infinity™ System • Operational characteristics of Infinity™ Systems • New Touch Screen Control features • …
2023 Infinity/Evolution Controls Training – LIVE – Anderson Read More »
Ductless Application & Installation Training (4 Hours) – Live – Carrollton
Ductless Application & Installation Training (4 Hours) – Live – Carrollton
This is a 1-Day (4 Hour) training event. This 4 hour course focuses on the specifications of Installation procedures, techniques and tips, Application designs of different (DLS) ductless products offered. Emphasis on loads, equipment capabilities, design, application and equipment selection. Who should attend: Sales Engineers, Sales Representatives, Contractor Business Owners, Installation and service technicians. This class receives …
Ductless Application & Installation Training (4 Hours) – Live – Carrollton Read More »
2 events,
2023 Inverter Driven Unit Training – Live – Anderson
2023 Inverter Driven Unit Training – Live – Anderson
We will cover installation of the outdoor unit, indoor unit, and User Interface. We will discuss features and functions of the system and how to ensure proper airflow and understand the critical charging of these systems. We will cover troubleshooting error codes and proper steps in determining the source of the error code. This class …
2023 Inverter Driven Unit Training – Live – Anderson Read More »
Ductless Start Up & Service Training – LIVE – Carrollton
Ductless Start Up & Service Training – LIVE – Carrollton
This is a 1-Day (4 Hour) training event. This 4 hour course focuses on the Startup and Service procedures, techniques and tips for the Carrier & Bryant Single and Multi-head indoor mini-split systems. Who should attend: Sales Engineers, Sales Representatives, Contractor Business Owners, Installation and service technicians. This class receives a 4 Hour FAD training credit and …
Ductless Start Up & Service Training – LIVE – Carrollton Read More »
2 events,
Gas Furnace Training featuring InteliSense Technology 12/7-12/8 – Zoom
Gas Furnace Training featuring InteliSense Technology 12/7-12/8 – Zoom
This is a 2 day - 2 hours each day (4 HOURS TOTAL) This 4 hour course is for those who design, sell, install and service Carrier and Bryant 80% & 90% gas furnaces. Content includes: Design criteria, ducting criteria, installation methods and tips, gas piping considerations, gas pressure requirements and measuring, proper venting, …
Gas Furnace Training featuring InteliSense Technology 12/7-12/8 – Zoom Read More »
38MUR Crossover Training – LIVE – Carrollton
38MUR Crossover Training – LIVE – Carrollton
This is a 1-Day (4 Hour) training event. This 4 hour course focuses on the Startup and Service procedures, techniques and tips for the 38MUR series . Who should attend: Sales Engineers, Sales Representatives, Contractor Business Owners, Installation and service technicians. This class receives a 4 Hour FAD training credit and for applicable certifications with NATE.
1 event,
Gas Furnace Training featuring InteliSense Technology 12/7-12/8 – Zoom
Gas Furnace Training featuring InteliSense Technology 12/7-12/8 – Zoom
This is a 2 day - 2 hours each day (4 HOURS TOTAL) This 4 hour course is for those who design, sell, install and service Carrier and Bryant 80% & 90% gas furnaces. Content includes: Design criteria, ducting criteria, installation methods and tips, gas piping considerations, gas pressure requirements and measuring, proper venting, …
Gas Furnace Training featuring InteliSense Technology 12/7-12/8 – Zoom Read More »
0 events,
0 events,
3 events,
Variable Frequency Drive Training 12/11-12/12 – Zoom
Variable Frequency Drive Training 12/11-12/12 – Zoom
This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This is a 4 hour training on the set up, programming , and troubleshooting of Carrier / Bryant commercial VFD systems including the ABB ACS 320 & ACH 550 drive as well as the Danfoss drive used by Carrier & Bryant …
Variable Frequency Drive Training 12/11-12/12 – Zoom Read More »
2023 Modern Airflow & Duct Design Training – Live – Wichita Falls 12/11 AM
2023 Modern Airflow & Duct Design Training – Live – Wichita Falls 12/11 AM
This is a 4 hour training event held in Iowa Park Texas This course focuses on the design and diagnosis of various duct materials and the effects of poor duct design and installation, as well as the positive aspects of a properly designed and installed duct system. ALERT!!! - This class requires the use of …
2023 Modern Airflow & Duct Design Training – Live – Wichita Falls 12/11 AM Read More »
2023 Gas Furnace Training – Live – Wichita Falls 12/11 PM
2023 Gas Furnace Training – Live – Wichita Falls 12/11 PM
This is a 4 hour training event held in Iowa Park Texas This course focuses on gas furnaces and the recent changes with added features including NFC and InteliSense Technology.
3 events,
Variable Frequency Drive Training 12/11-12/12 – Zoom
Variable Frequency Drive Training 12/11-12/12 – Zoom
This is a 2 day - 2 hours each day class. (4 HOURS TOTAL) This is a 4 hour training on the set up, programming , and troubleshooting of Carrier / Bryant commercial VFD systems including the ABB ACS 320 & ACH 550 drive as well as the Danfoss drive used by Carrier & Bryant …
Variable Frequency Drive Training 12/11-12/12 – Zoom Read More »
2023 Commercial Package Unit Training – LIVE – Wichita Falls 12/12 AM
2023 Commercial Package Unit Training – LIVE – Wichita Falls 12/12 AM
This is a 4 hour training event held in Iowa Park Texas This course will cover installation, setup, service and troubleshooting of Small/Medium Roof Top Units as well as the NEW 40RF Commercial Fan Coils. NATE 8575-0101
2023 Variable Frequency Drive Training – LIVE – Wichita Falls – 12/12 PM
2023 Variable Frequency Drive Training – LIVE – Wichita Falls – 12/12 PM
This is a 4 hour class held in Iowa Park This is a 4 hour training on the set up, programming , and troubleshooting of Carrier / Bryant commercial VFD systems including the ABB ACS 320 & ACH 550 drive as well as the Danfoss drive used by Carrier & Bryant in their packaged products …
2023 Variable Frequency Drive Training – LIVE – Wichita Falls – 12/12 PM Read More »
1 event,
EC Motor Training – 12/13-12/14 – Zoom
EC Motor Training – 12/13-12/14 – Zoom
This is a 2-Day / 2-Hour per day course. (4 HOURS TOTAL) This course focuses on field troubleshooting of Carrier and Bryant Variable Speed ECM, Multi-tap (X-13) motors, Vane Axial motors and Control Boards. Includes proper diagnostic procedures using sequence of operation, VOM’s, direct testing of motors and modules and the differences of module versions. Webinar …
1 event,
EC Motor Training – 12/13-12/14 – Zoom
EC Motor Training – 12/13-12/14 – Zoom
This is a 2-Day / 2-Hour per day course. (4 HOURS TOTAL) This course focuses on field troubleshooting of Carrier and Bryant Variable Speed ECM, Multi-tap (X-13) motors, Vane Axial motors and Control Boards. Includes proper diagnostic procedures using sequence of operation, VOM’s, direct testing of motors and modules and the differences of module versions. Webinar …
1 event,
R-454B Advanced Puron A2L Introduction Training
R-454B Advanced Puron A2L Introduction Training
The course will be approximately 1.5-2 hours depending on class activity and participation. This course will explore how our equipment is designed to comply with safe operation when R-454B is used. The course will focus on what agencies require for A2L refrigerants and what we are doing to comply, using R-454B specifically. In this course, …
0 events,
0 events,
0 events,
0 events,
0 events,
1 event,
Inverter Driven Unit Training – Live – Stolhand
Inverter Driven Unit Training – Live – Stolhand
We will cover installation of the outdoor unit, indoor unit, and User Interface. We will discuss features and functions of the system and how to ensure proper airflow and understand the critical charging of these systems. We will cover troubleshooting error codes and proper steps in determining the source of the error code. This class …
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
0 events,
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
- There are no events on this day.
English 
Spanish