Infinity/Evolution Controls Day 1 Quiz

Where can you find helpful troubleshooting guide, videos, training and your submitted help forms?

carrier.com

Correct Incorrect Correct answer

carrierenterprise.com

Correct Incorrect Correct answer

cesctechsupport.com

Correct Incorrect Correct answer

HVAC Partners

Correct Incorrect Correct answer

When looking at the below model number of a User Interface, what would the “ITC” indicate?

White Infinity® System Control with Wi-Fi

Correct Incorrect Correct answer

Black Infinity® System Control with Wi-Fi

Correct Incorrect Correct answer

It Talks Communicating

Correct Incorrect Correct answer

Intelligent Touch Control

Correct Incorrect Correct answer

All current communicating controllers are backwards compatible?

Yes

Correct Incorrect Correct answer

No

Correct Incorrect Correct answer

If a communicating controller fails, you can wire in a 24v thermostat and keep all of the same equipment functionality?

Yes

Correct Incorrect Correct answer

No

Correct Incorrect Correct answer

If you have a controller that is set to 70° and the controller is reading 70°, what could the actual temperature of the space be?

69.5° – 70.5°

Correct Incorrect Correct answer

69.9° to 70.9°

Correct Incorrect Correct answer

69.1° – 70.9°

Correct Incorrect Correct answer

69.9°

Correct Incorrect Correct answer

What is the current software version for -B or greater controllers?

3.00

Correct Incorrect Correct answer

3.26

Correct Incorrect Correct answer

3.92

Correct Incorrect Correct answer

4.05

Correct Incorrect Correct answer

4.47

Correct Incorrect Correct answer

What is the easiest/quickest way to update the wall controller?

MicroSD card

Correct Incorrect Correct answer

Wi-Fi

Correct Incorrect Correct answer

USB cable

Correct Incorrect Correct answer

BTM – Bluetooth Module

Correct Incorrect Correct answer

The controller can allow the system to overcool by up to 3° as long as the temperature is above 65° inside ?

False

Correct Incorrect Correct answer

True

Correct Incorrect Correct answer

To unlock a locked screen controller you must?

Tap the screen to wake the controller up

Correct Incorrect Correct answer

Press and hold "unlock" for approx. 15 seconds

Correct Incorrect Correct answer

Tap on "unlock"

Correct Incorrect Correct answer

Enter the default passcode which can be found in the literature

Correct Incorrect Correct answer

If a user cannot see their controller within the app or their online account, which remote access status could indicate a problem?

Both the network status and the MyInfinty server status

Correct Incorrect Correct answer

Network status

Correct Incorrect Correct answer

MyInfinity server or the MyEvolution server status

Correct Incorrect Correct answer

WiFi status

Correct Incorrect Correct answer

What will be required for Remote Access Setup when registering an account?

Model and Serial number of the controller

Correct Incorrect Correct answer

Model number, serial number and the mac address

Correct Incorrect Correct answer

Serial number, mac address and the PIN number

Correct Incorrect Correct answer

As long as it is connected to WiFi it should find the controller's information

Correct Incorrect Correct answer

Comfort profiles can be set for each programmed period?

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

What is 1 thing you MUST do if connecting the controller to WiFi?

Set time and date

Correct Incorrect Correct answer

Set homeowners schedule

Correct Incorrect Correct answer

Setup weather

Correct Incorrect Correct answer

Cycle power to refresh the controller

Correct Incorrect Correct answer

What setting could enable a system to run inadvertently while following a schedule?

High humidity

Correct Incorrect Correct answer

Occupancy sensor being enabled and now the space is occupied

Correct Incorrect Correct answer

A drastic cold front that lowers the temp in the home

Correct Incorrect Correct answer

2 or more zones calling for heating or cooling

Correct Incorrect Correct answer

If the Occupancy Status indicator is Gray, what would this tell us?

No movement has been detected

Correct Incorrect Correct answer

Movement has been detected

Correct Incorrect Correct answer

The space is now occupied

Correct Incorrect Correct answer

A dog or cat passed by

Correct Incorrect Correct answer

Do you have to hold the Service Hat until it turns green to get into the Homeowners Advanced Screen?

Yes

Correct Incorrect Correct answer

No

Correct Incorrect Correct answer

If you are installing a controller in a closet and wiring in a remote sensor you MUST enable humidity for remote sensing?

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Remote room sensors use what type of resistor?

10K ohm PTC type thermistor

Correct Incorrect Correct answer

20K ohm PTC type thermistor

Correct Incorrect Correct answer

20K ohm NTC type thermistor

Correct Incorrect Correct answer

10K ohm NTC type thermistor

Correct Incorrect Correct answer

How many remote room sensors must you use in order to temperature averaging?

1

Correct Incorrect Correct answer

2

Correct Incorrect Correct answer

3

Correct Incorrect Correct answer

4

Correct Incorrect Correct answer

How do you wire your 4 remote sensors for temperature averaging?

Series

Correct Incorrect Correct answer

Series/Parallel

Correct Incorrect Correct answer

Parallel

Correct Incorrect Correct answer

Series/Staggered

Correct Incorrect Correct answer

When should you use 18 AWG thermostat wire?

over 25'

Correct Incorrect Correct answer

over 75'

Correct Incorrect Correct answer

over 100'

Correct Incorrect Correct answer

over 200'

Correct Incorrect Correct answer

In what scenario might you need a NIM (Network Interface Module)?

If you have a non-communicating 1-stage heat pump to a communicating control furnace

Correct Incorrect Correct answer

If you have a HRV/ERV unit (Non-zoned only)

Correct Incorrect Correct answer

If you have a non-communicating 2-stage outdoor unit to a communicating control system

Correct Incorrect Correct answer

All of the above

Correct Incorrect Correct answer

On power up, what is the 1st piece of equipment the controller identifies?

Indoor unit

Correct Incorrect Correct answer

Outdoor unit

Correct Incorrect Correct answer

NIM – Network Interface Module

Correct Incorrect Correct answer

Zoning panel

Correct Incorrect Correct answer

Smart Recovery will start recovery ____ minutes prior to schedule change in both heating and cooling mode

30 minutes

Correct Incorrect Correct answer

60 minutes

Correct Incorrect Correct answer

90 minutes

Correct Incorrect Correct answer

120 minutes

Correct Incorrect Correct answer

The “Heat Source” menu from the Homeowner Menu Screen will allow the user to set the heat source, much like an “emergency heat” selections?

True

Correct Incorrect Correct answer

False

Correct Incorrect Correct answer

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

21. Question

22. Question

23. Question

24. Question

25. Question